Jaybee Industries logoJaybee Industries · Delhi, Noida, Gurugram, Ghaziabad, Faridabad Toll-free 1800 309 9948

Posts · Delhi NCR

Transformers for factories in Narela, Bawana and the Kundli industrial belt

Posted on by Jaybee Industries

North-west Delhi’s industrial areas and the Kundli belt across the border host a wide mix of small and mid-size factories on compact plots. Their transformer needs vary, but some common points apply.

Narela and Bawana in north-west Delhi were developed as planned industrial areas, and many units relocated there from older parts of the city. Across the border, the Kundli and Rai belt in Sonipat district has also grown into a busy manufacturing zone. Together they host plastics, packaging, food processing, electrical goods, footwear, metal fabrication, printing and many other small and medium industries. Our plants supply transformers for such factories across the NCR, and this article covers common questions.

Mixed industries, different loads

The right transformer depends on the industry:

  • Plastics and packaging: heater bands, extruders, moulding machines and chillers.
  • Food processing: refrigeration, mixers, ovens, packaging lines.
  • Metal fabrication: welding, presses, cutting and machining.
  • Electrical and electronics assembly: lighter loads, but sensitive to voltage quality.
  • Printing: presses, dryers and compressors.

Rather than relying on rules of thumb, prepare a load list for your specific machines and operating pattern.

Compact plots and siting

Plots in these industrial areas are often small, with buildings covering most of the area. Finding space for a transformer can be difficult. Options include:

  • A compact substation at the plot front, combining HV switchgear, transformer and LV panel.
  • A pole-mounted or plinth-mounted transformer, where the utility allows and the rating is small.
  • An indoor dry-type transformer in a ventilated room, where outdoor space is not available.

Whatever you choose, keep access for maintenance and replacement, and avoid placing the transformer where goods are stacked.

Utility coordination

Connections in Delhi and Haryana are handled by different utilities with their own procedures and technical requirements. Find out early what supply voltage is offered, whether you need your own transformer, and what approvals and documents are required. Test certificates and drawings from the manufacturer are usually needed.

Load growth

Many units start small and add machines. If your sanctioned load is close to the transformer's capacity, expansion may need a new transformer. Plan with some headroom, or keep space for a second unit if growth is likely.

Power quality and power factor

Drives, welding and rectifier loads create harmonics and lower power factor. An automatic capacitor bank, detuned where needed, helps meet utility requirements. Sensitive assembly lines may benefit from separate feeders and surge protection.

Summer heat

Delhi summers are severe. Transformers in confined spaces with poor ventilation run hot. Ensure adequate clearance and ventilation around outdoor units and proper ventilation design for indoor rooms.

Maintenance in shared areas

In dense industrial areas, transformers can be affected by dust, debris and neighbouring activities. Regular cleaning, checking oil levels and breathers, and thermal imaging of connections keep them healthy.

Shared buildings and flatted factories

Some industrial areas include flatted factory complexes and multi-tenant buildings where several units share a substation. If you operate in such a building, find out how the supply is arranged, what capacity is available for your unit and who maintains the transformer. Expanding your load may require coordination with the building management and the utility. Where a dedicated transformer is needed, space is usually the main constraint, so compact and dry-type options become important.

Relocating from older areas

Units relocating from congested older industrial areas often bring old transformers with them or try to reuse an existing unit at the new plot. Before reusing a transformer, test it, check that its rating and voltage ratio match the new connection, and confirm it meets current utility requirements. A transformer that has been moved and stored needs proper inspection before energisation, including oil testing and insulation checks.

What to send us

  • Location and utility.
  • Machine list or load details.
  • Plot layout and proposed transformer location.
  • Expansion plans.

Offers are prepared on request for your requirement; we do not publish prices.

Send your enquiry

Call toll-free 1800 309 9948, message us on WhatsApp at +91 98162 95407, or email info@jaybeeindustries.com. Mention this article and your site location so the right team responds. We reply with technical options; we do not publish prices, and every offer is prepared for your specification.

Related pages on this site

Request a quote Call 1800 309 9948 WhatsApp +91 98162 95407 info@jaybeeindustries.com

← All posts

CallWhatsAppGet a quote